- Home
- Equipment
Refine by
Pro Mill Environmental Equipment & Supplies
9 equipment items found
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
Mixers for solid products are widely used e.g. in food, cosmetic and agricultural industries. They can be used to mix powders, grains of solids or plastic substances of high viscosity (e.g. paste). Depending on the properties of the substances being mixed, the mixer is equipped with a special type of agitator, ensuring the appropriate degree of mixing of the ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
Disk filters are a new, innovative filtration method, based on the use of ceramic discs with an accuracy of 2um to even 5nm. It can be successfully used as a substitute for micro or ultrafiltration. Disk filters can be made in different standards – from typically industrial to pharmaceutical, which allows for a very wide range of applications in various ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
Mixing is the process of dynamically equalizing the concentration, density and other physicochemical properties of substrates. The selection of an appropriate mixing system depends on the properties of the substance and the process conditions in which the device is to ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
The CIP (Clean In Place) stations in our offer are used to clean equipment, production lines and industrial pipelines in closed cycle. The CIP washing station is equipped with an automation system responsible for controlling the entire washing process. This type of device can be operated manually or be fully ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
Chemical reactors are devices used to carry out a process with regard to relevant process parameters such as temperature, pressure. These devices are designed with consideration of the processes taking place inside them, such as the kinetics of the reaction, thermal effects, properties of the substance or the method of substrate mixing. The design is preceded by appropriate process and mechanical ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
Drying is the process of removing moisture or other volatile substances from solids, sludges and suspensions. Various types of dryers are used for this process. Since heat can be transferred in several ways, there are five types of dryers – convection, diaphragm, radiant, dielectric and microwave and special. One of the types of convection dryers is the spray dryer and fluidized bed dryer ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
A homogenizer-type mixer is used to carry out the homogenization process based on combining two unmixed components into a stable, homogeneous mixture. Typical products that are produced by industrial homogenizers are cosmetic products, from a range of care products such as creams or ointments. Homogenizers produce stable emulsions in the food industry, especially such as mayonnaise, sauces ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
Pro-mill’s liquid phase bioreactor is a compact system built on a SKID frame designed to carry out biotechnology processes on liquid substrates on a scale from laboratory to industrial. For this reason, fermenters are widely used in the biotechnology, cosmetics and food industries. Due to the nature of the processes carried out, the fermenter must remain sterile to eliminate the possibility ...
Manufactured by:Pro-mill s.c. based inPruszków, POLAND
Pro-mill’s solid phase bioreactor is used to carry out biotech processes on solid substrate. The installation is mounted on a SKID frame and has all the necessary equipment for the process. The solid phase reactor consists of a main vessel and a set of mixers designed for the specific application. The main reaction occurs on the solid material filling the tank. The solids are kept at an ...